Auralex RC8 Resilient Channel at TrueSoundControl.com

Your sound control source, featuring products from Auralex Acoustics

	Why buy from us? (More reasons...) - Established company w/retail stores - Shop the entire Auralex product line - Free Shipping - No Min. Purchase

ACOUSTIC FOAM PANELS
Alleviate ringing/echoes with StudioFoam wall panels.

FABRIC ACOUSTIC PANELS
Finish your designer space with Class A fabric acoustic panels.

BASS TRAPS
Control low-end frequencies
& cut the rumble in your room.

COMPLETE ROOM KITS
Eliminate the guesswork with these pre-packaged all-in-one kits.

MAX-WALL KITS
Keep it portable with stand-mounted acoustic foam kits.

SOUND DIFFUSORS
Kill standing waves and extend your studio's "sweet spot."

ISOLATION
Isolate speakers, subwoofers, amps and drums from the floor.

SOUNDPROOFING
Keep interior sound in, keep unwanted noise out.

ADHESIVES & MOUNTING
Choose from permanent, semi-permanent or temporary mounting.

* CLEARANCE BIN *
Open boxes, discontinued items and more - up to 50% off.

Home > Auralex > Soundproofing >

Auralex RC8 Resilient Channel

Auralex RC8 resilient channel is a specially-formed, sturdy metal device that, when used to hang drywall (instead of just attaching the drywall directly to the studs or joists), GREATLY improves the sound transmission characteristics of the wall or ceiling system. Auralex RC8 Resilient Channel adds 1/2" of airspace between the studs and drywall and can provide as much as 10 dB of isolation if used properly.

RC8 should be installed horizontally at the bottom and top of your wall, then every 2' or less in between. Up to (2) layers of 5/8" drywall and a layer of SheetBlok may be hung on RC8, even on a ceiling.

Size: 8' long per piece
Qty: 24 pieces per box


This rendering shows how the RC8 resilient channel is mounted to a wall stud. Note that the channel is attached at the lower contact point and lips out and up.	RC-8 resilient channel is installed on the walls and ceiling and is ready for a drywall / Sheetblok / drywall sandwich.

Installation Tips

Position RC-8 Resilient Channel at right angles to steel studs, space 24" o.c. and attach to stud flanges with 3/8" Type S pan head screws driven through holes in channel mounting flange.
Use 1-¼" Type W screws to mount the RC-8 to wood studs/joists/framing.
Locate channels 2" from floor and within 6" of ceiling.
Install channels with mounting flange down (see picture below), except at floor to accommodate attachment.
Splice channel by nesting (not butting) directly over stud. Screw-attach through both flanges.
A 2-hr. floor/ceiling system with STC/MTC ratings as high as 60/54 is achievable with a ceiling of double-layer 5/8" gypsum board attached to RC-8 channels across joists with 3" Mineral Fiber Insulation in the joist cavities.

RC Comparison Table (PDF) contains a table of wall constructions with their 1/3 octave band Transmission Loss values, STCs and (when available) MTCs measured in accordance with ASTM E413. The table is intended for use in comparing wall systems before and after the addition of resilient channel. It is not intended to be a complete partition STC/MTC resource. For information on other partitions, please see the source references in the document.

Related Items:


Auralex SheetBlok (4'x30' roll)	Auralex 2" Mineral Fiber Insulation	Auralex 4" Mineral Fiber Insulation	Auralex U-Boats Floor Floaters	Auralex T-Coustic Ceiling Tiles	Auralex StopGap Acoustical Sealant

View Larger Image

TrueSoundControl.com is owned and operated by Metro Music, an independent authorized dealer of Auralex products.
Site contents copyright © 2003-2009 Metro Music, 9 Butler Blvd., Bayville, NJ 08721
Contact Us